Category Archives: Green Plumbing

 

There’s a good possibility that you have water leakage somewhere in your family’s water consumption seems higher than normal. And the culprit behind this is faulty pipes or appliances you are using. So, if you find the issue, you should fix them as soon as possible. Here are some tips on how you can reduce water and energy consumption.

 

Plumbing Tips to Reduce Water and Energy Consumption

 

1. Low-Flow Faucets

Generally, people use lots of water when in the bathroom. For example, we continuously open the tape for water or use the flash too many times. Also, while taking a shower, we use lots of water. Hence, you should also consider using low-flow faucets to reduce water consumption and energy.

 

The low-flow faucets let you use only your needed amount of water which is very convenient. But the downside is that installing the low-flow faucet is expensive. And if you think about the long-term benefit, this is worth it.

 

2. Check For Leaks

Check out the leakage both inside and outside of your whole plumbing system. Thus you will know how much water you use and the leakage. So, you can fix it immediately. On the other hand, a slight leakage could lead to significant damage that you don’t want. Hence, make sure you maintain the whole plumbing system regularly.

 

3. Change Your Home Appliances

If you have been using the dishwasher and washing machines for more than ten years, you should consider upgrading them with new ones. According to research, new appliances dramatically reduce water wastage. Thus, it saves water and reduces the electricity bills as well.

 

4. Tankless Water Heater

You can go for the tankless water heater instead of the traditional water heater. That’s because while using a conventional water heater, we continuously turn on the faucet until we get warm water. So, go for a tankless heater. This will give you warm water without wasting water; also, this will reduce electricity bills.

 

5. Replace Pipes

Usually, the old pipe is the main reason for leakage. However, if you find any leakage, you should consider replacing the pipe with new ones. Also, it is recommended to change the whole plumbing every 20 years for any home. Hence you should consider replacing the entire pipe system of your house to reduce water and electricity bills.

 

6. Use Solar System

You can use a solar system to heat water instead of electricity. This is how you can reduce the electricity bills and make your home eco-friendly.

 

7. Don’t Forget the Drains

The drain is not out of water and electricity so don’t forget this thing. Drain is fundamental to the overall plumbing system. For plumbing systems, energy efficiency and water conservation are great only if you have a well-drained system.

 

8. Develop Garden Management

You should also focus on garden management when it comes to water and electricity consumption. First, check out the water hoses if there is any leakage. Also, ensure you turn off the water hoses if you are going out of the home for a few days.

 

Conclusion

Plumbing is fundamental to a house, so you should focus on that properly. Otherwise, you will have lots of water waste and electricity bills every month.

What Is Green Plumbing?

The phrase green plumbing means catching all the items that help save water. There are many green plumbing initiatives that you can apply. For instance, low-flow fixtures, tankless water heaters, etc. Let’s discuss the details here.

 

Integrating Green Plumbing Into Your Home Design

 

1. Solar Power Hot Water System

A solar power hot water system is an excellent example of green plumbing. If you use solar power, you can heat water by using solar technology. This saves your electricity bill greatly.

 

2. Rainwater Tanks

You can use rainwater tanks next to your house, usually large containers. This collects rainwater which falls from the roof and reaches the tanks through downpipes. This is one of the practical ways of harvesting using rainwater through intelligent drainage systems.

 

You will need a qualified emergency plumber houston to fix a rainwater tank. If you want to do it DIY, this may cause damage. However, rainwater is also a resource for your garden as well. This helps save water, as well as electricity bills.

 

3. Proper Piping

When it comes to green plumbing, then proper piping comes to mind. That means regular maintenance of the pipes will reduce the issue of leaky pipes and so on. In addition, you can insulate the pipe, which will help save water.

 

4. Tankless Water Heater

You can use a tankless water heater to reduce the wastage of water. Usually, we use the tape until we get warm water which is massive water wastage. So when you start using the tankless water heater, this will save your energy bill and reduce water wastage.

 

5. Water Sensor Homes

Nowadays, you can find water sensor home fixtures that help save water. After installing the sensor, it will notify you if it detects any water leakage or if the pipe is damaged.

 

6. Purchase New Home Appliances

If you have used the dishwasher or washing machine for more than ten years, you should consider upgrading them. That’s because researchers found that old appliances are also responsible for water wastage.

 

On the other hand, new appliances use less water which is incredible. And this will help you save water, and reduce the electricity bills incredibly.

 

7. Low-Flow Fixtures

By using low-flow fixtures at your home, you can also go for green plumbing. The low-flow fixtures are usually slightly expensive, but if you think about the long-term result, you would understand the investment would be worth it.

 

If you want a green plumbing system, consider the low-flow fixtures for your home.

 

8. High-efficiency Faucet

The bathroom fixture you are using is another main reason for water wastage. Do you ever notice how much water you use while washing your hands or during a shower? Or, when brushing your teeth, how much water do you waste?

 

That is where a high-efficient faucet comes in handy. You can go for an efficient faucet like touch faucets that will help you save water. That’s because the faucet will flow water only when it gets your touch.

Conclusion

Hopefully, you understand how to interrogate your home with green plumbing. If you want to save water and reduce electricity bills, go for your home’s green plumbing.

You must hear the phrases go green and reduce carbon footprint; these means leave less impact on the environment even though we are using energy-efficient appliances.

 

When you switch to green plumbing, you save money on energy and water bills. But, at the same time, it lets you consume clean and fresh water.

 

In this guide, we will discuss 6 green plumbing tips for your home. So, let’s get into the discussion.

 

6 Green Plumbing Tips for Your Home

 

1. Tankless Water Heater

Most people have a large water heater in the basement, and you may have the same. The water heater is a very convenient appliance, but it wastes energy and water as well.

 

To save water, you can use a tankless water heater instead. This will warm up the water when you need to use water. A tankless water heater works like magic in terms of saving energy and water.

 

2. Use Low-Flow Home Appliances

Many of us use a long hot shower after a hard day; at the same time, when we use the toilet or sink usually use a continuous flow of water. And most of the time, we do not notice how much water we are using during those times.

 

According to the EPA, per year, a person can save 13,000 gallons of water simply by installing a low-flow toilet. Hence, you can choose low-flow water appliances to save water.

 

3. Opt For a Heat Pump

You can also go for a heat pump if you do not want to use a tankless water heater. This can help you save two to three times your energy savings by reducing the use of electricity.

 

However, if you keep the heat pump in a warmer environment, this will work the best. Keep in mind that the installation of a heat pump is expensive, but the benefit you will get from it is worth investing in.

 

4. Heat Water With Solar Power

If you don’t like a tankless water heater or heat pump, go with solar power. This is one of the amazing ways of making the plumbing of your house green.

 

A solar panel saves energy, as well as saves your costs. This also lets you save energy on almost everything a house uses electricity for. The invention of solar power is one of the best methods of green in your house.

 

5. Upgrade Appliances

Usually, older appliances use extensive water; that’s why you can think about upgrading your home appliances. For example, if your dishwasher, washing machine, or water heater is more than ten years old, it is high time to upgrade them.

 

According to research, new appliances are eco-friendly for everyday use. However, if you don’t want to use low-flow devices, then consider upgrading your home appliances. This is an excellent option for you.

 

6. Looking for Leaks

Your home plumbings could have a leak, and there are many reasons. So, check out for leaks in the plumbing fittings. This will help you to reduce water waste. And if you are not aware of leaking, this could damage your home. Moreover, this increases the utility bills that are not convenient.

 

Final Words

These are the 6 green plumbing tips for your home that you can apply to your house. By using these tips, you are making your home more eco-friendly than before. Hopefully, this guide will help you, and you will implement them in your house.